You Must Know Cleaning and Maintenance Tips for Solar Panel - ceNdor Industry
Owning solar panels is a big decision and considered a good investment. There are several ways to keep your Solar panels in the best and most secure way. However, companies that install solar panels also provide a guidebook elaborating on cleaning and maintenance tips for solar panels.
Keep in Mind Some Cleaning and Maintenance Tips for Solar Panel
CeNdor Industry provides a manual and a guidebook of Dos and Don’ts for the safety of your panels. You can follow six maintenance tips for your solar panels.
Keep Your Solar Panels In Direct Sunlight:
Of course, it is best to install solar panels on the rooftop, but it is mandatory to make sure that your roof is getting ample sunlight from all corners. Keeping the solar panels in shade is unproductive and it may not give the expected result.
Timely Inspection of Solar Panels:
Ensure that panels should be kept in the high location of your site. These panels are made up of glass and require utmost care. The particles in the air often accumulate on the panels which are not good for the upkeep of the solar panels. They might destroy the motive which results in loss of power.
Timely inspection and cleaning ensure the safe and long life of your panels. Proper cleaning and safety also provide you with unhindered energy production which means no loss of power.
Read More: Solar Panel Installation Services by the Certified team of Experts in Delhi NCR
Cleaning Method:
The primary step to clean the panels is to remove the dirt and fallen leaves with a soft dry cloth. The panels are installed in an inclining position in order to keep away the birds and stray animals.
To ensure the best practice of cleaning in case of stubborn stains and mud spots. Keep remembering to avoid any kind of detergent, soap or any hard substance to clean your solar panels.
Try to take light cleaning liquid partly mixed with water. Dip the cloth in a cleanser and rub the spots gently. Take alcoholic substances like sanitizers or liquid spirit for better results.
Routine Inspection of Components:
The glass body, Bolts and frayed wiring of your solar panels are required to be inspected on a timely basis in order to ensure no glitches. Always remember, that early examination of your costly panels will prevent any costly damage or serious issues.
Checking of Energy in Use:
After the installation of solar panels is done on your site, the team of “CeNdor Industry” gives a demo. The demo includes all the above-mentioned directions for cleaning, inspection and routine check-up.
The team also directs for timely checking of energy usage. This can be checked in an energy usage monitor which is installed right next to the switchboard of solar panels.
Related Posts
_and_DC_Mode_(Cendor))1.jpg "image")
